Reliability Maintenance Takes a Medical Approach to Rotating Equipment, Part 2 – Temperature Measurements

Mar 13, 2024 | Predictive Maintenance

Reliability Maintenance Temperature Measurements

Latest Posts

NEMA Standards, Part 3 – Understanding Frame Number Suffixes

By defining how motors are designed, built, and referred to on their respective nameplates, standards from the National Electrical Manufacturers Association apply to all electric motor manufacturers to ensure that all manufacturers follow identical dimension data and...

Proper Rigging Techniques for Overhead Cranes

To perform a safe and successful lift, the crane operator and rigger(s) must consider the crane, environmental conditions, load, sling and hitch, and the desired operation. Since unbalanced loads, exceeding the crane’s capacity, or using a defective sling can quickly...

Enhancing Standby Generator Reliability

How can we enhance the dependability of standby generators? Standby generators serve a crucial role in case of power outages or emergencies. Yet, what if your generator fails to start during an outage? Surprisingly, the leading cause of generator failure is often...

Is Your Motor Experiencing Excessive Heat?

Identifying the root cause of an overheating motor can be challenging, given the multitude of potential issues it may signify. In this article, we will explore common reasons behind motor overheating, how to confirm overheating as the culprit, corrective measures, and...

What are Hoists, and What Do They Do?

A hoist is an overhead lifting device that uses pulleys and either wire rope or chain to lift the load or move it horizontally. Hoists work by transferring the load from the hook to the traveling beam of the crane, allowing them to move heavy items around the work...

The Benefits of Overhead Crane Modernization

As your business grows and evolves, you will likely need to increase your crane’s capacity, speed, or reliability to keep up with increased demands. For many, purchasing a new crane to meet these new demands may seem like the best option until you see the price tag....